CH3SNAS: Volume_1 & Volume_2 (sda / sdb)

CH3SNAS when using 1 disk, no matter which slot you are using: it will always be Volume_1 (standard mode or normal mode). Under the hood the Volume_1 is a a symbolic link to sda or sdb. If inserted left Volume_1 is a symbolic link to sdb if inserted right: the disk is sda

So at the bottom: the sda and sdb will make a reverse change, so the user won’t notice it has changed

So if you want to have sda equal to Volume_1 in all circumstances: start using the HDD in the right HDD tray. 

CH3SNAS 1.04a1 release

1.04a1 release CH3SNAS firwmware, 1st release in 1.04 range. Only for beta-testers.

Drop your comments here

  • UPnP Media Server content instantly updated by SMB and FTP transfer
  • Sending e-mail: allow the use of . and – in e-mail addresses
  • NFS v3 Server Support (kernel module support) enabled. Engineer forgot to enable it previous time(s) where it should be enabled as we wrote it was supported. Additional you need Fun_Plug to get it working
  • Scandisk feature: removed. Too much issues

This firmware is as-is and not qualified (yet) to be released through the conceptronic.net website.

Lekker!

Recept van de week:

Ingredienten:

  • Sla (wat jij lekker vind)
  • Geitekaas met Honing
  • Gamba’s
  • Sud ‘n’ Sol Tomaatjes
  • Gebakken spekjes
  • Dressing: Olijf-Olie, honing, en wat mediterranee kruiden
  • Gerookte kip blokjes / reepjes
  • Crema di Balsamico om het af te maken ..

Sla op het bord, sud ‘n’ sol tomaatjes erop, kaas erop, gebakkens spekjes erbij, dressing erover scheppen met een klein lepeltje, en afmaken met wat Crema di Balsamico (Modena). Als laatste de gebakken gamba’s erbij. Zie je het voorje? Dat wordt smullen!

Beta testing new firmware CH3SNAS ?

I’ve new firmware available for those sending me an e-mail @ dennis @ aroundmyroom dot com

it’s 1.03 (0418.2008) where we have removed the scandisk function and fixed the e-mail issues with regard to the . and – characters not be able to use to store/save it.

In reply to reports of users mentioning that the HDD does not want to go into standby: engineers are not able to reproduce this <sigh>, so I must collect as much info as possible

  • How Much HDD? 1 or 2 ?
  • What is/are the brandname(s) of the HDD(s) ?
  • If you use 1 HDD, is it inserted LEFT or RIGHT (frontview) ?
  • If you use 2 HDD which one does not spindown ?
  • With which firmware did you format the HDD: 1.02, 1.03 ?
  • How is it formatted? Single Disk, Raid1 etc…
  • Do you use UPnP Server ?
  • Do you use iTunes Server ?
  • Did you enable PowerSave ?
  • Do you use Fun_Plug ?
  • Any other additional info you want to give?